Sri Chinmoy Statues

5 min read · By Tomi Gal ·

From heart to bronze.

Every statue begins in the heart and travels through the hands. Here is the path it takes, from the first photograph to the final patina.

Lost-wax bronze casting is a technique more than 6,000 years old: a wax copy of a sculpture is encased in ceramic, melted out in a kiln and replaced by molten bronze. Each Sri Chinmoy statue passes through ten phases and six crafts, and takes two to four months to complete.

1. Study

Thousands of photographs and hours of film are gathered and studied, feature by feature: the line of the brow, the fold of a sleeve, the way the hands rest together. Before anything is shaped, it is understood.

2. Drawing

Everything begins with the heart, then the hands. Pencil studies of the face and the posture fix the proportions and the feeling of the work.

3. Sculpting

The same hand guides new chisels and classic ones. In digital sculpting, every proportion is shaped against the photographs; in clay, the form takes on weight and touch. Weeks, sometimes months, of patient work.

4. The model

The model is printed with precision, then completed by hand: built up and refined with clay wherever the form calls for touch.

5. The mould

A flexible silicone mould, around six millimetres thick, captures every detail of the model. A rigid plaster jacket, the “mother mould”, holds its shape.

6. The wax

Molten wax is brushed and poured into the mould in layers, until a hollow wax copy about six millimetres thick is formed. Each wax is retouched by hand, and a network of wax channels, the sprues, is attached so the bronze can later flow.

7. The ceramic shell

The wax is dipped into a fine ceramic slurry and dusted with sand, again and again: five or six layers, each left to dry for hours, until a shell about twelve millimetres thick surrounds it.

8. Fire and bronze

In the kiln, at over 650 °C, the wax melts and runs out: this is why the process is called “lost wax”. Into the hot, empty shell, bronze is poured at over 1,000 °C. Cooling takes hours, sometimes days.

9. Chasing

The shell is broken away and the surface cleaned. Sections are welded together, and goldsmiths chase each detail by hand, restoring every line of the face and every fold of the cloth. Polishing brings out the light.

10. The patina

The bronze is warmed with a torch, and patina solutions are brushed on, coat by coat: warm browns, or the deep turquoise of old bronze. A final layer of wax seals and protects the surface for generations.

See the statues: all Sri Chinmoy statues · Read more about lost-wax bronze casting.

Begin the conversation

Begin the conversation.

Every statue is made with time and care. Tell us what you have in mind, and we will gladly guide you.